The jigsaw is a very useful aid even if they are not among the enthusiastic hobbyists. Using jigsaws can cut different kinds of wood, plywood, chipboard, sheet metal, plastic floor, as well as roofing, just replace the saw blade.
is a very useful aid even if they are not among the enthusiastic hobbyists. Using jigsaws can cut different kinds of wood, plywood, chipboard, sheet metal, plastic floor, as well as roofing, just replace the saw blade.
How to choose a suitable jig saw
It is necessary to consider what purpose you need a jig saw. The wood cutting saw us suffice with a fixed rate of oscillation, but if we want to cut other types of materials you need to select a saw with speed regulation. Lower speed is suitable for cutting metal, plastic or other non-straight cuts.
This parameter indicates how long the saw could operate without overheating. However, according to the power not quite pinpoint performance. There is no rule that represents a high wattage high performance.
Electric or cordless jigsaws
If we have electricity, we turn instead to the electric saw. But there are places where you need to use only cordless saw (at the cottage, boat, etc.). It is good, however, to think that saw battery has less power and stamina than an electric saw.
Correct grip saws
When the acquisition is good to think about how we handle saws suit. There are two types of handles. Single called. Žehličkové handle which allows for greater control of the cut and palm or mushroom handle which offers improved comfort during cutting so. Converts slices, when the saw is reversed so that the incision is made along the underside of the cut surface.
Sawdust blower means that are blown out sawdust from the cut line and is standard equipment jigsaws. Dust extraction represents an opportunity to join the pile sack for sawdust.
Bits against chipping chips
These attachments are made of plastic and committed to the base plate and enclose in close proximity to the saw blade. Terminals that prevent excessive chipping chips on the edges of the cuts.
Parallel guide serves to guide the straight cuts.
The hanger will be used in the management circular cuts. It works on the principle of the compass.